The following table shows the relevant configuration file for the calibration/verification combinations:
Alayuk
configuration file |
calibration |
verification |
opsk202.dat opsk201.dat opsk203.dat |
1901-1940 1941-1983 1901-1983 |
1941-1983 1901-1940 |
Tree chronology file: canalas.mxd
Climate data file: nhalaska.dat
To execute the transfer function run: run_recon_canalas_CH.sh
Mackeva
configuration file |
calibration |
verification |
opsk212.dat opsk211.dat opsk213.dat |
1901-1940 1941-1988 1901-1988 |
1941-1988 1901-1940 |
Tree chronology file: canmack.mxd
Climate data file: nhmacken.dat
To execute the transfer function run: run_recon_canmack_CH.sh
Quebla
configuration file |
calibration |
verification |
opsk234.dat opsk233.dat opsk235.dat |
1901-1940 1941-1988 1901-1988 |
1941-1988 1901-1940 |
Tree chronology file: canqueb.mxd
Climate data file: nhquebec.dat
To execute the transfer function run: run_recon_canqueb_CH.sh
For Alayuk and Quebla the above configuration reproduces the results in Table 2, Mackeva has some small discrepancies.
To execute the reconstruction run:
run_recon_canalas.sh which picks up the coefficients file (coeffsk203.dat) and the parameters file (osrrecon203.par).
run_recon_canmack.sh which picks up the coefficients file (coeffsk213.dat) and the parameters file (osrrecon213.par).
run_recon_canqueb.sh which picks up the coefficients file (coeffsk235.dat) and the parameters file (osrrecon235.par).
The executable used is reconnorm_canada (compiled from reconnorm_canada.for - in this case an unmodified reconnorm.for).
The normalised output from the above (osrrecon203.dat, osrrecon213.dat and osrrecon235.dat) matches the original output (osrrecon203_ORIGINAL.dat, osrrecon213_ORIGINAL.dat and osrrecon235_ORIGINAL.dat).
The three time series (osrrecon_ts203.dat, osrrecon_ts213.dat and osrrecon_ts235.dat) output visually match the plots in Figure 4.